Are all closed-loop stepper systems created equal?

Are all closed-loop stepper systems created equal?
No. Some manufacturers give the closed-loop stepper systems similar-sounding descriptions, which confuses the marketplace. As proof of the confusion, it's not uncommon that a designer requests one capability and actually needs another.

 

What are the most common closed-loop stepper systems?
There are three common types: nema 23 Closed-loop stepper with step-loss compensation; closed-loop stepper with load position control; and closed-loop stepper servo control. Stepper-drive manufacturers call them all "closed loop" but the three have distinct functionalities.


How do I get the right control for my application?
Machine builders must ask: Which control scheme does the application require? It may not be immediately apparent which control scheme the drive uses. Therefore, ask the manufacturer for details and review the documentation to ensure you get the right control scheme.

 

What are the functionalities of these closed-loop stepper systems?
nema 17 geared Closed-loop stepper with step-loss compensation is the most common type of closed-loop stepper control. The stepper drive operates as a micro-stepping drive and typically receives pulse and direction commands to move to the desired position. An encoder tracks shaft or load position. If lost steps are detected, a compensation algorithm inserts additional steps so that the motor shaft (or load) arrives at the desired position. Typically, the stepper-motor drive has settings for two currents: The motor gets running current when in motion and gets resting current when stopped.

 

What are the advantages and disadvantages of the different functionalities?

http://oyosteper.xobor.de/t3f2-Which-should-I-choose-Between-NEMA-and-NEMA.html

 

How to choose NEMA 23 or NEMA 34 stepper motors?

The decision between NEMA 23 and NEMA 34 motors is primarily a decision about productivity — NEMA 34 motors can remove material at a higher rate using higher feed rates and deeper cut depths.

The style of motor you choose is not the determining factor in what materials can be cut — this is far more a function of the mechanical stiffness of the machine doing the cutting, as well as proper speeds, feeds and tooling. With our machine kits, either of our motor packages can cut hardwood, plastic, and non-ferrous materials such as aluminum.

Motors serve to accelerate and decelerate components of the machine (such as the gantry or z axis), as well as to push the cutting bit through material. NEMA 34 motors can take deeper passes through material and improve cutting speeds, especially on larger machines.

Generally, if you are using a machine for regular production work, higher power NEMA 34 motors will provide a fast return on investment. However, if you are primarily doing small production runs or prototyping work, NEMA 23 motors will likely be sufficient.

Source:https://blog.oyostepper.com/2018/07/06/how-to-choose-nema-23-or-nema-34-stepper-motors/

NEMA Specifications and Torque Ratings of Stepper Motor

Stepper motors are relatively simple mechanisms: A series of electromagnetic coils are activated in a specific sequence to spin a motor shaft a precise number of degrees. The NEMA specification is what allows stepper motors to be identified, and references the size of the faceplate of the motor.

A large collection of various stepper motors.

Most 3D printers utilize NEMA 17 stepper motors. There are many popular variations, each having different physical qualities suitable for different applications. These are primarily distinguished by torque rating, in Newton Centimeters (N⋅cm).

The three popular varieties tend to be around 20-25 N⋅cm, 40-45 N⋅cm, and 50-56 N⋅cm. The motors in the first range are generally called “pancake motors”, while the 40-45 N⋅cm variations are considered “standard” and the final set “high torque”.

Below, we’ve assembled a list of uses for each variation, which should help you choose the best motor for your needs. Finally, the last section briefly discussed how to install a stepper motor.

Safe Installation of Stepper Motor for 3D Printer

Pancake Stepper Motor: Bipolar, 200 Steps Overview

Source:https://blog.oyostepper.com/2019/11/01/nema-specifications-and-torque-ratings-of-stepper-motor/

歯科技工士の給料・年収分析

歯科技工士の平均年収

厚生労働省平成27年賃金構造基本統計調査」の結果、歯科技工士の平均年齢は、正社員の場合で41.2歳で、勤続年数が11.5年であることがわかりました。そして給与に関しては、月収は32万600円となりました。さらに平均年収は426万8400円で、年間ボーナスの平均が、42万1200円でです。国税庁の「平成26年民間給与実態統計調査結果」によると、給与所得者の平均年収は415万円だったので、歯科技工士の年収は、やや高めの水準であることがわかります。また日本における歯科技工士は、世界的に見て技術力がトップレベルです。しかし、職人技を身に付けても高収入を得ることは難しく、年齢を重ねていくとともに給与は安定してきます。

【正社員】
平均年齢 41.2歳
勤続年数 11.5年
労働時間 173時間/月
残業時間 8時間/月
平均月収 320600円
賞与   421200円
平均年収 4268400円
労働者数 8710人

【パート】
平均年齢 45.4歳
勤続年数 6.4年
実労働日数 17.5日/月
1日の平均労働時間 6.3時間/日
平均時給 1088円

出典:「平成27年賃金構造基本統計調査」(厚生労働省
※平均年収については本統計データを加工して作成(きまって支給する現金給与額×12ヶ月+年間賞与その他特別給与額)

女性の仕事としての歯科技工士

歯科技工士の80パーセント近くが、男性です。したがって、女性の仕事というイメージが薄い仕事かもしれません。実際には、歯科技工士として活躍する、職人レベルの高い女性も多く存在します。この仕事の魅力の1つが、収入です。歯科技工士の平均年齢である40代前半の場合、女性だと年収は200万円台後半です。歯科技工士であれば、400万円前後の年収を安定して得ることが可能です。ですが、歯科技工士の仕事は、残業が多くて労働時間も長いため、家庭を持つ女性には不向きだという考えもあります。また職場によっても、固定の休暇制度や育児休暇などが整っていません。このような条件を考慮した上で、働く意思がある女性には適した仕事だと言えます。

パートで歯科技工士として働く

歯科技工士としてパート勤務する場合、時給は1088円です。平成28年3月度の時点で、三大都市圏(首都圏・東海・関西)の平均時給は977円でした。時給が最も高い首都圏でも1019円なので、歯科技工士のパート勤務は、一般的な水準でも、やや高めの時給が得られる仕事です。 歯科技工士の1日の平均勤務時間が6.3時間で、1か月の平均勤務日数は17.5日です。

 


-----------------------会社情報----------------------
Oyodental.jpは、高品質のアマルガムミキサー 歯科真空成型器 歯科を提供する中国一流のオンラインサプライヤーであり、卸売価格でありながら迅速・効率のあるサービス提供しております


入したい方はOyodentalデンタルへお問い合わせください。

メール:Oyodental.jp@gmail.com
公式サイト:https://www.oyodental.jp/

歯科なぜ、十分な対策を取ることができないのか?

歯科 莫大なコスト
歯科院内感染対策のためには、滅菌機器や予備分の器具購入など莫大な投資が必要となってきます。
1本のタービンハンドピース 激安通販の価格は10万円〜20万円。
滅菌にかけるたびに劣化していきますので、修理費用や新規購入などのコストがかかります。

Runsheng YS-CS-A(V1)超音波スケーラーボトル付きスケーラー LED光ファイバー付き

 

歯科 医療制度の限界
また日本の保険医療制度も、歯科医院の経営難を助長しています。
歯科における保険診療費は非常に安く設定されているため、患者にとっては良い反面、保険診療を行う医院にとっては非常に苦しい経営を強いられることになります。
さらに、院内感染対策に対しての国の補助はほんのわずかであるため、新たに莫大な費用をかけて対策をしようという医院は少数になってしまうのです。

 

歯科 器具の滅菌が追いつかない
一人あたりの単価が安い場合、利益をあげるには一日に何人もの患者を診察しなければなりません。
すると使用する器具も増え、滅菌に時間もコストもかけることができなくなり、洗浄しただけの使い回しがされるというような事態になってしまうのです。

わたしたちにとって保険診療は安いという恩恵がある一方で、コストをかけられないがためのリスクも確実に存在します。

 

感染経路の特定が難しい
仮に何らかの感染があった場合、歯科診療が原因であったかどうかの特定は難しいとされています。そのため問題が顕在化されず、業界全体として対策意識が広がりにくいというのも理由の一つとして挙げられます。

https://dentagama.com/clinicpages/1109/basic-dental-chair-parts-you-should-know

https://press.tiary.jp/read-user.php?aid=14021

ムシ歯の進行は5段階にわけられます

歯内療法とは
「シナイリョウホウ」と聞くと、ちょっと分かりにくいでしょうが、「歯内療法」という字をみていただくと、 想像していただけるでしょう。歯内療法とは文字通り、「歯の内部の治療」のことをいいます。ですから本来の 広い意味の定義では、むし歯(う蝕)の治療をして、セメントなどをつめることも含まれます。しかし、通常は、 歯の根の中の管(これを根管といいます)に関した治療を、歯内療法と呼んでいます。

 

ムシ歯の進行は5段階にわけられます。

 

● C0

歯・治療前《歯の状態・治療方法》
溝に着色。歯面清掃を徹底して、経過観察。虫歯の進行はないかもしれない。歯科医の定期的な診査の上で。 

 

● C1

歯・治療前《歯の状態・治療方法》
歯の表面のエナメル質だけがムシ歯になっている状態です。歯の表面がザラついたり、シミや小さな黒い点ができますが、 痛みはありません。ごく初期なので、ムシ歯になっている部分だけを削って、穴をつめて治療をします。

 

矢印

 

歯・治療前《治療》
虫歯のところだけ除去し、詰める

 

● C2

歯・治療前《歯の状態・治療方法》
歯のエナメル質をやぶり、その下にある象牙質にまで進行した状態です。この状態になると、 冷たい水や甘いものなどを食べるとしみるようになります。また、食べ物を噛んだ時などに痛みを感じることもあります。 C1と同じく、歯冠部の治療で完了します。

 

矢印

 

歯・治療前《治療》
虫歯の部分を除去。歯髄を保護して詰める。

 

● C3

歯・治療前《歯の状態・治療方法》
歯髄という歯の神経に達し、炎症が起きます。穴が深く、大きくなるためいつも痛むようになります。 神経を残すことが最良の方法と考え、出来るだけ神経を抜かない努力をします。 昔は悪い歯はすぐ抜いていましたが、できるだけ歯を残すという考えで、このような治療を行います。

 

矢印

 

歯・治療前《治療》
歯質の残存の状態により修復の方法は異なるが神経をとった歯は破損の心配があるので咬む面は保護することが必要になる。 根管治療をして神経のあった穴を完全に封鎖する。

 

● C4

歯・治療前《歯の状態・治療方法》
ムシ歯がもっとも進行した状態です。歯の根(歯根)の部分だけが残って歯髄は腐敗しています。 このためアゴの骨までやられると痛みが出たり腫れたりします。 健康な歯質がある程度残り、歯根の長さが十分ある場合は、出来るだけ残す努力をします。

 

矢印

 

歯・治療前《治療》
根管治療をして神経のあった穴を完全に封鎖する。 歯の形態を回復して冠をかぶせる。

 

 

-----------------------会社情報----------------------
Oyodental.jpは、高品質の歯科用マイクロスコープ歯科用ルーペライトを提供する中国一流のオンラインサプライヤーであり、卸売価格でありながら迅速・効率のあるサービス提供しております


入したい方はOyodentalデンタルへお問い合わせください。

メール:Oyodental.jp@gmail.com
公式サイト:https://www.oyodental.jp/

 

関連記事:

Q.根の中に金属が入っていると言われたのですが?

歯神経をとる必要があると言われたのですが?

Q.神経をとる必要があると言われたのですが?


A.根の中の神経にはある程度の抵抗力はあります。しかし、神経が狭い空間に入っていることや 神経が根の中に入って来る部位が狭く血管が豊富でないなどの理由で、 一度神経に炎症が生じるとそのまま死んでいくことが多いです。 激しい痛みがあったり、神経の部屋が見えてしまうくらい大きな虫歯があったりする場合は神経をとる必要があります。


痛んでいた歯の神経が死んでいくと、一時的に痛みは和らぐこともあり、 患者様が感じる症状と歯の状態が一致しないこともあります。主治医の先生とよく相談して下さい。

 

Q.神経をとるのに大きな穴が開くのですが、あんなに削ってだいじょうぶですか?


A.歯は構造上内部が軟らかいので、虫歯は外から見えている以上に中で広がっていることが多いです。 そこで悪いところはすべて取り、さらに残った部分がかみ合わせの力で割れないように 形を整えると大きな穴が開いたように感じますが、歯を残して治療していくために必要な処置です。

 

-----------------------会社情報----------------------
Oyodental.jpは、高品質のペーパーポイント歯科ニッケルチタンファイルを提供する中国一流のオンラインサプライヤーであり、卸売価格でありながら迅速・効率のあるサービス提供しております


入したい方はOyodentalデンタルへお問い合わせください。

メール:Oyodental.jp@gmail.com
公式サイト:https://www.oyodental.jp/